BMW 7 Series: Ambient light
General information
Depending on the equipment version, lighting can be adjusted for some lights in the car's interior.
Switching on/off
The ambient light is switched on when the vehicle is unlocked, and switched off when the vehicle is locked.
If the ambient light was deactivated via iDrive, it will not be switched on when the vehicle is unlocked.
Via iDrive:
- "CAR"
- "Settings"
- "Interior lighting"
- "Ambient lighting"
The selected setting is stored for the driver profile currently used.
Selecting the color scheme
Via iDrive:
- "CAR"
- "Settings"
- "Interior lighting"
- "Color"
- Select the desired setting.
Setting the brightness
Via iDrive:
- "CAR"
- "Settings"
- "Interior lighting"
- "Brightness"
- Select the desired setting.
Dimmed while driving
Some lights of the interior lighting are dimmed when the vehicle is driven in the dark.
Via iDrive:
- "CAR"
- "Settings"
- "Interior lighting"
- "Dimmed for night driving"
The selected setting is stored for the driver profile currently used.
Panoramic glass sunroof, lighting
If the panoramic glass sunroof is opened or the sun protection is closed, the lighting in the area concerned is switched off.
BMW Touch Command
The ambient light can also be operated using BMW Touch Command.
Bowers & Wilkins Diamond Surround Sound System
General information
Some speakers in the vehicle are illuminated.
Brightness can be individually set.
If the speakers are muted, speaker lighting will be switched off.
Switching on/off
The speaker lighting is switched on when the vehicle is unlocked, and switched off when the vehicle is locked.
Via iDrive:
- "CAR"
- "Settings"
- "Interior lighting"
- "Bowers & Wilkins"
The selected setting is stored for the driver profile currently used.
Setting the brightness
Via iDrive:
- "CAR"
- "Settings"
- "Interior lighting"
- "Bowers & Wilkins"
- "Brightness"
- Select the desired setting.
BMW Touch Command
The operation of the Bowers & Wilkins Diamond Surround Sound System is also possible using BMW Touch Command.
READ NEXT:
Ambient highlight
General information
The ambient highlight illuminates the door pillars
in the rear.
When opening a rear door, the brightness of the
ambient highlight of the respective door pillar is
reduced. After t
Airbags
Vehicle features and
options
This chapter describes all standard, country-specific
and optional features offered with the series.
It also describes features and functions that are
not necessarily ava
SEE MORE:
Steptronic transmission- Launch Control
Concept
Launch Control enables optimum acceleration
on surfaces with good traction under dry surrounding
conditions.
General information
The use of Launch Control causes premature
component wear since this function represents a
very heavy load for the vehicle.
Do not use Launch Control during the b
Start-Up With Test Run Of Dynamic Drive (EPS Steering Gear)
NOTE: The Service function Initial operation of Dynamic Drive must be
carried out
after:
Work on the Dynamic Drive system which involved opening hydraulic
lines
Replacement/Programming/Coding Dynamic Drive control unit (ICM - V -
High)
IMPORTANT: Adhere to the utmost cleanliness. Do not allo
