BMW 7 Owners & Service Manuals

BMW 7 Series: Apple CarPlay preparation

Concept

CarPlay allows certain functions of a compatible Apple iPhone to be used via Siri voice operation and iDrive.

Functional requirements

  • Compatible iPhone, iPhone 5 or later with iOS 7.1 or later.

    Compatible devices

  • Corresponding mobile contract.
  • Bluetooth, WLAN, and Siri voice operation are activated on the iPhone.
  • Booking the ConnectedDrive service: Apple CarPlay preparation.

Switching on Bluetooth and CarPlay

Via iDrive:

  1. "COM"
  2. "Mobile devices"
  3.  Move the Controller to the right.
  4.  "Settings"
  5. Select the following setting: "Apple CarPlay"
  6. Activate the function.

Pairing the iPhone with CarPlay

Via iDrive:

  1. "COM"
  2. "Mobile devices"
  3. Move the Controller to the right.
  4. "New device"
  5. "Phone calls and audio" The vehicle's Bluetooth name is displayed on the Control Display.
  6. On the mobile device, search for Bluetooth devices in the vicinity and select the vehicle.

    A control number is displayed.

  7. Compare the control number displayed on the Control Display with the control number on the display of the mobile device, and confirm that the two match.
  8. Select CarPlay: "Confirm note and connect to Apple CarPlay"

The iPhone is connected to the vehicle and displayed in the device list.

Operation

For more information, refer to the Integrated Owner's Manual or the Owner's Manual for Navigation, Entertainment, Communication.

Frequently Asked Questions

All requirements are met and all required steps were completed in the specified order. Despite that, the mobile device does not function as expected.

In this case, the following explanations can help: The iPhone has already been paired with Apple CarPlay. When a new connection is established, CarPlay can no longer be selected.

  • Delete the iPhone concerned from the device list.
  • On the iPhone, delete the vehicle concerned from the list of stored connections under Bluetooth and under WLAN.
  • Pair the iPhone as a new device.

If the steps listed have been carried out and the required function is still not available: contact the hotline, a dealer's service center or another qualified service center or repair shop.

    READ NEXT:

     Screen Mirroring

    General information Screen Mirroring enables mirroring (outputting) of the smartphone display on the Control Display. Functional requirements Compatible smartphone with Screen Mirroring interface.

     Opening and closing

     Vehicle key

    Vehicle features and options This chapter describes all standard, country-specific and optional features offered with the series. It also describes features and functions that are not necessarily ava

    SEE MORE:

     Stabilizer Bar

    REMOVING AND INSTALLING/REPLACING REAR ANTI-ROLL BAR Necessary preliminary tasks Remove both ANTI-ROLL BAR LINKS FROM ANTI-ROLL BAR Release screws (1). Tightening torque 33 55 1AZ. Installation: Replace screws. Turn anti-roll bar (2) and remove sideways. Fig. 153: Identifying Screws And Anti-R

     Removing And Installing/Renewing Inlet And Exhaust Adjustment Units On Left Side (N63)

    Notes IMPORTANT: When the engine is shut down, the inlet and exhaust camshaft adjuster is normally locked in its initial position. The situation may arise in some individual cases where this initial position is not reached and the camshaft can continue to be rotated in the adjustment range of the

    © 2019-2025 Copyright www.bmw7g11.com