BMW 7 Series: Front head restraints
General information
The current head restraint position can be stored
using the memory function.
Safety information
Warning
A missing protective effect due to removed or
not correctly adjusted head restraints can
cause injuries in the head and neck area. There
is a risk of injury.
- Before driving, install the removed head
restraints on the occupied seats.
- Adjust the head restraint so its center supports
the back of the head at as close to
eye level as possible.
- Adjust the distance so that the head restraint
is as close as possible to the back
of the head. Adjust the distance via the
backrest tilt as needed.
Warning
Body parts can be jammed when moving the
head restraint. There is a risk of injury. Make
sure that the area of movement is clear when
moving the head restraint.
Warning
Objects on the head restraint reduce the protective
effect in the head and neck area. There
is a risk of injury.
- Do not use seat or head restraint covers.
- Do not hang objects, for instance clothes
hangers, directly on the head restraint.
- Only use accessories that have been determined
to be safe for attachment to a
head restraint.
- Do not use any accessories, for instance
pillows, while driving.
Active head restraint
In the event of a rear-end collision with a certain
severity, the active head restraint automatically
reduces the distance from the head.
Have the active head restraint checked and if
necessary replaced in the case of damage or if it
was exposed to an accident.
Adjusting the height
Push switch up or down.
If the vehicle is equipped with Executive Lounge
Seating: the height of the head restraint on the
front passenger side cannot be adjusted.
Adjusting the distance: manual head restraints
- Back: press the button and push the head restraint
toward the rear.
- Forward: pull the head restraint toward the
front.
After setting the distance, make sure that the
head restraint engages correctly.
Adjusting the distance: power
head restraints
The head restraint is automatically repositioned
when the upper backrest is adjusted.
Adjusting the side extensions
Fold the side extensions on the head restraint
forward for increased lateral support in the resting
position.
Removing
The head restraints cannot be removed.
READ NEXT:
Safety information
Warning
A missing protective effect due to removed or
not correctly adjusted head restraints can
cause injuries in the head and neck area. There
is a risk of injury.
Before drivi
General information
The mirror on the front passenger side is more
curved than the driver's side mirror.
The mirror setting is stored for the driver profile
currently in use. When a driver profile is
Safety information
Warning
Steering wheel adjustments while driving can
lead to unexpected steering wheel movements.
Vehicle control could be lost. There is a risk of
accident. Adjustng the steering
SEE MORE:
Notes on safety
SAFETY REGULATIONS for handling airbag modules, airbag components and
pyrotechnical seat belt
tensioners
NOTES ON SCRAPPING vehicles with gas generators
DEACTIVATION/ACTIVATION PYROTECHNICAL COMPONENTS
Handling electrical and electronic equipment
UNLOCKING/LOCKING AIRBAG PL
NOTE: Owing to the different engine variants and equipment specifications,
not all the
components are taken into consideration.
The following list basically represents the removal sequence.
Clamp off battery negative lead (job number: 6120 900)
Remove bumper trim (job number: 5112156)
Remove bu