BMW 7 Series: Overview
Vehicle features and options
This chapter describes all standard, country-specific and optional features offered with the series.
It also describes features and functions that are not necessarily available in your vehicle, e.g., due to the selected options or country versions. This also applies to safety-related functions and systems.
When using these functions and systems, the applicable laws and regulations must be observed.
Overview
.gif)
- Filler neck for washer fluid
- Jump-starting, positive battery terminal
- Oil filler neck
- Coolant reservoir, engine
- Gasoline engine only: coolant reservoir, auxiliary cooling
- Jump-starting, negative battery terminal
- Vehicle identification number
READ NEXT:
Hood
Safety information
Warning
Improperly executed work in the engine compartment
can damage vehicle components and
impair vehicle functions. There is a risk of an
accident and damage to property. Have wo
Fuel recommendation
Vehicle features and
options
This chapter describes all standard, country-specific
and optional features offered with the series.
It also describes features and functions that are
not necessarily ava
SEE MORE:
Removing Entry Profile Section On Loading Ramp, Left, Right And
Center
CAUTION: Before drilling out rivets, drive in rivet pins with a punch.
Drill out rivets (1). Remove entry profile section (2) towards front.
Fig. 62: Identifying Profile Section On Loading Ramp And Rivets
REMOVING LEFT OR RIGHT SHOCK ABSORBER
Inspect the shock absorber while installed to ascertain
Notes On Handling Optical Fibres
IMPORTANT: To avoid damage when handling optical fibres, comply with the
following
points:
The minimum permitted bending radius is 25 mm
Do not subject optical fibres to compressive and tensile load
Protect optical fibres against the effects of heat > or =85 ºC (e.g.
during
welding work,
© 2019-2024 Copyright www.bmw7g11.com
