BMW 7 Owners & Service Manuals
BMW 7 Series (G11/G12) 2015-2022 Owners Manual / Controls / Safety / Automatic deactivation of the front-seat passenger airbags

BMW 7 Series: Automatic deactivation of the front-seat passenger airbags

Concept

The system reads if the front passenger seat is occupied by measuring the human body's resistance.

Front, knee, and side airbag on the front passenger's side are activated or deactivated.

General information

Before transporting a child on the front passenger seat, refer to the safety information and instructions for children on the front passenger seat, see Children.

Safety information

Warning


To ensure the front-seat passenger airbag function, the system must be able to detect whether a person is sitting in the front passenger seat. The entire seat cushion area must be used for this purpose. There is a risk of injuries or danger to life. Make sure that the front passenger keeps his or her feet in the floor area.

Malfunction of the automatic deactivation system

When transporting older children and adults, the front-seat passenger airbags may be deactivated in certain sitting positions. In this case, the indicator light for the front-seat passenger airbags lights up.

In this case, change the sitting position so that the front-seat passenger airbags are activated and the indicator light goes out.

If it is not possible to activate the airbags, have the person sit in the rear.

To enable correct recognition of the occupied seat cushion:

  • Do not attach covers, cushions, ball mats or other items to the front passenger seat unless they are specifically determined to be safe for use on the front passenger seat.
  • Do not place any electronic devices on the front passenger seat if a child restraint system is to be installed on it.
  • Do not place objects under the seat that can push against the seat from below.
  • No moisture in or on the seat.

Indicator light for the front-seat passenger airbags

The indicator light for the front-seat passenger airbag in the roofliner indicates the operating state of the front-seat passenger airbag.

The light indicates whether the airbags are either activated or deactivated.

After drive-ready state is switched on, the light briefly lights up and then indicates whether the airbags are either activated or deactivated.

  • The indicator light lights
    up when a child is properly seated in a child restraint system or when the seat is empty. The airbags on the front passenger side are not activated.
  • The indicator light does not light up when, for instance a correctly seated person of sufficient size is detected on the seat. The airbags on the front passenger side are activated.

Detected child restraint systems

The system generally detects children seated in a child restraint system, particularly in child restraint systems required by NHTSA at the point in time when the vehicle was manufactured. After installing a child restraint system, make sure that the indicator light for the front-seat passenger airbags lights up. This indicates that the child restraint system has been detected and the front-seat passenger airbags are not activated.

    READ NEXT:

     Intelligent Safety

    Concept Intelligent Safety enables central operation of the driver assistance systems. General information Depending on how the vehicle is equipped, Intelligent Safety consists of one or more systems

     Front collision mitigation

    Concept The system may prevent some accidents. In the event of an accident, the system may reduce impact speed. The system sounds a warning before an imminent collision and activates brakes independe

     Front collision mitigation- Switching on/off

    Switching on automatically The system is automatically active after every driving off. Switching on manually Press the button. The menu for the Intelligent Safety system is displayed. If all Intell

    SEE MORE:

     Removing And Installing/Replacing Electric Changeover Valve On Exhaust Turbocharger, Left (N63)

    Necessary preliminary work Remove left TURBOCHARGER. Release screws (1). Remove electric changeover valve. Installation note: Replace O-ring. Fig. 475: Identifying Electric Changeover Valve Screws Assemble engine. Follow diagnosis instruction. Complete vehicle Powertrain Engine electrical

     Antenna System Overview

    Depending on the optional equipment, F01/F02 vehicles are equipped with different antennal systems: FM/AM radio with IBOC system (rear window antennas) Roof antenna for SDARS satellite radio Navigation system (roof antenna) Remote control services (rear window antenna) Telephone (roof antenna

    © 2019-2024 Copyright www.bmw7g11.com