BMW 7 Series (F01/F02) 2008-2015 Service Manual / Information & Communications / Telephone System
BMW 7 Series: Telephone System
READ NEXT:
System Overview
The Telematics Control Unit (TCU) and the interface box 'High' (ULF-SBX-H)
control units are connected to
the MOST bus. TCU and interface box 'High' may both be fitted in the vehicle for
certain equ
Functions
Bluetooth Pairing (pairing wizard)
The pairing wizard presents the step-by-step instructions for the entire
pairing process via the Central
Information Display (CID). Detailed help texts and instruct
BMW Services
These services are offered to customers under the generic term "BMW Assist".
From the customer's point of view, "BMW Assist" is a convenient service
guaranteeing more safety, more
mobility and compr
SEE MORE:
Removing And Installing Actuator Unit With Control Unit For
Parking Brake (EMF)
Necessary preliminary work
Remove BOTH REAR WHEELS.
IMPORTANT: The following work must only be carried of ISID diagnosis
system with
software version 02.21 or later.
Delete fault memory.
Check function of actuator unit.
If actuator unit is defective, set BMW diagnosis workshop mode.
Operatin
Mechanical Attachments
REPLACING SELECTOR SHAFT SEAL (GA6HP26Z)
Notes
IMPORTANT: After completion of work, check TRANSMISSION OIL LEVEL.
Use only the approved TRANSMISSION FLUID.
Failure to comply with this requirement will result in serious damage to the
automatic transmission!
Necessary preliminary tasks
Remove rear
© 2019-2025 Copyright www.bmw7g11.com
