BMW 7 Owners & Service Manuals
BMW 7 Series (G11/G12) 2015-2022 Owners Manual / Mobility / Wheels and tires / Tire pressure monitor- Actions in the event of a flat tire

BMW 7 Series: Tire pressure monitor- Actions in the event of a flat tire

Normal tires

  1. Identify the damaged tire.

    Check the tire inflation pressure in all four tires, for instance using the tire pressure gage of a flat tire kit.

    For tires with special approval: when the tire inflation pressure in all four tires is correct, the Tire Pressure Monitor may not have been reset.

    In this case, perform the reset.

    If tire damage cannot be found, contact a dealer's service center or another qualified service center or repair shop.

  2. Repair the flat tire, e.g., with a flat tire kit or by changing the wheel.

Use of sealant, for instance from the flat tire kit, may damage the wheel electronics. Have the electronics replaced at the next opportunity.

Run-flat tires

Safety information

Warning

The vehicle handles differently when a run-flat tire has insufficient or no tire pressure; for instance, reduced lane stability when braking, braking distances are longer and the self-steering properties will change. There is a risk of accident.

Drive moderately and do not exceed a speed of 50 mph/80 km/h.

Maximum speed

You may continue driving with a damaged tire at speeds up to 50 mph/80 km/h.

Continued driving with a flat tire

Follow the following when continuing to drive with a damaged tire:

  1. Avoid sudden braking and steering maneuvers.
  2. Do not exceed a speed of 50 mph/80 km/h.
  3. Check the tire inflation pressure in all four tires at the next opportunity.

Possible driving range with a depressurized tire

The distance for which it may be possible to drive safely varies depending on how the vehicle is loaded and used, e.g., speed, road conditions, external temperature. The driving range may be less but may also be more if an economical driving style is used.

If the vehicle is loaded with an average weight and used under favorable conditions, the distance for which it may be safe to drive may be up to 50 miles/80 km.

Vehicle handling with damaged tires

Vehicles driven with a damaged tire will handle differently, potentially leading to conditions such as the following:

  • Greater likelihood of swerving off course.
  • Longer braking distances.
  • Changed self-steering properties.

Modify your driving style. Avoid abrupt steering maneuvers or driving over obstacles, for instance curbs or potholes.

Final tire failure

Vibrations or loud noises while driving can indicate the final failure of a tire.

Reduce speed and stop; otherwise, pieces of the tire could come loose and cause an accident.

Do not continue driving. Contact a dealer's service center or another qualified service center or repair shop.

    READ NEXT:

     Tire pressure monitor- System limits

    Temperature The tire inflation pressure depends on the tire's temperature. Driving or exposure to the sun will increase the tire's temperature, thus increasing the tire inflation pressure. The tire

     Flat Tire Monitor FTM

    Concept The system detects tire inflation pressure loss on the basis of rotation speed differences between the individual wheels while driving. In the event of a tire inflation pressure loss, the dia

     Tire pressure monitor- Actions in the event of a flat tire

    Normal tires Identify the damaged tire. To do this, check the tire inflation pressure in all four tires, for instance using the tire pressure gage of a flat tire kit. When the tire inflation pre

    SEE MORE:

     Output Shaft

    NOTES ON REMOVING AND INSTALLING LOW PROFILE BAND CLAMPS Notes IMPORTANT: During removal Low Profile band clamp (dotted line) is overstretched and must not be reused! Fig. 82: Identifying Low Profile Band Clamp (Dotted Line) Removing Place special tool 31 5 200 on tabs (1, 2). NOTE: Make sure that

     System Functions

    The Principle The HUD can be compared to a projection device. A light source is required to project the HUD information. The two LED arrays (red and green) serve as the light source. The image content is created by the TFT projection display. The TFT projection display can be compared to a filter

    © 2019-2024 Copyright www.bmw7g11.com