BMW 7 Series: Trip data

Concept

Values for the trip, such as the average consumption or trip miles, are displayed.

General information

The trip data can be displayed on the Control Display and in the instrument cluster.

The values can be displayed and reset depending on various intervals, such as after refueling.

Display on the Control Display

Overview

The following information is displayed based on the configured interval:

• Configured interval for displaying trip data.
• Average fuel consumption depending on the configured interval.
• Average speed.
• Total time for shut off engine through the Auto Start/Stop function.
• Distance traveled in Coasting mode.
• Consumption history in form of a chart.

Displays

Via iDrive:

1. "CAR"
2.  "Driving information"
3.  "Trip data"

Consumption history

The average consumption is shown in the consumption history in form of a chart based on the distance traveled and the driving mode.

Display in the instrument cluster

Information about the route can be displayed as widget in the tachometer. Selecting and setting widgets in the instrument cluster.

The following information is displayed:

• Total mileage.
• Configured interval for displaying trip data.
• Distance traveled depending on the configured interval.
• Average speed.

Additional information: Widgets in the instrument cluster

Adjusting the display of the trip data

The intervals for the display of the trip data in the instrument cluster and on the Control Display are adjustable.

Via iDrive:

1. "CAR"
2. "Driving information"
3. "Trip data"
4. "Data since"
5. Select the desired setting:

• "Start of trip ( )": the values are automatically reset approx. four hours after the vehicle has come to a standstill.
• "Refueling ( )": the values are automatically reset after refueling with a larger quantity of fuel.
• "Factory": the values since the time of the factory delivery are displayed.
• "Individual ( )": the values since the last manual reset are displayed. The values can be reset at any time.

Resetting average values manually

The following interval can be reset manually at any time: "Individual ( )".

With the button on the turn signal lever:

1. Continue to press the button on the turn signal lever until the widget for the trip data is selected.

2. Press and hold the button on the turn signal lever.

Via iDrive:

1. "CAR"
2. "Driving information"
3. "Trip data"
4. "Data since"
5. "Reset individual"

The average values and counters are reset.

Once the average values and counters have been reset, the following interval is automatically set: "Individual ( )".

Sport displays

Concept

The Sport displays especially support a sporty driving style.

Display on the Control Display

Overview

The following information is displayed:

• Boost pressure.
• Engine oil temperature.
• Acceleration power, G meter.
• Torque.
• Power.

Displays

Via iDrive:

1. "CAR"
2. "Driving information"
3. "Sport displays"

Display in the instrument cluster

The Sport displays can be displayed in form of widgets in the instrument cluster.

The following widgets can be selected:

• Widget for torque and power.
• Widget for acceleration power, G meter.

Additional information: Widgets in the instrument cluster

Vehicle status

General information

The status can be displayed and actions performed for several systems.

Opening the vehicle status

Via iDrive:

1. "CAR"
2.  "Vehicle status"

Information at a glance

Symbols /Description

"Flat Tire Monitor": status of
the run-flat tires

"Tire Pressure Monitor": status
of the Tire Pressure Monitor

"Engine oil level": electronic
oil measurement

"Check Control messages":
displaying stored Check Control messages

"Service schedule": displaying
service notifications

READ NEXT: