BMW 7 Series (F01/F02) 2008-2015 Service Manual / General Vehicle Electronics / Exterior Rear View Mirrors
BMW 7 Series: Exterior Rear View Mirrors
READ NEXT:
Introduction
Outside Mirrors
For the F01/F02, there is only one variant of the outside mirrors. The
outside mirrors can be electrically
adjusted as standard. The outside mirrors are equipped with a mirror heating
System Overview
Input/output - Outside Mirrors
Fig. 88: Outside Mirrors Input/Output System Diagram
COMPONENTS DESCRIPTION CHART
Instrument cluster
Footwell module FRM
Outside temperature sensor
Junction box el
Functions
Overview
The following outside mirror functions are possible depending on the vehicle
equipment:
Mirror adjustment in up/down and left/right directions
Mirror heating
Mirror fold-in
Electrochrom
SEE MORE:
Removing Entry Profile Section On Loading Ramp, Left, Right And
Center
CAUTION: Before drilling out rivets, drive in rivet pins with a punch.
Drill out rivets (1). Remove entry profile section (2) towards front.
Fig. 62: Identifying Profile Section On Loading Ramp And Rivets
REMOVING LEFT OR RIGHT SHOCK ABSORBER
Inspect the shock absorber while installed to ascertain
Connecting Rod With Bearing
REPLACING ALL CONNECTING ROD BEARINGS (N63)
Notes
IMPORTANT: Note grinding stages on crankshaft.
Necessary preliminary work
Removing all PISTONS
Install new connecting rod bearing shells.
Install one blue bearing shell (1) and one red bearing shell (2) in each
connecting rod.
Install PISTON.
F
© 2019-2025 Copyright www.bmw7g11.com
